Henny Penny FlexFusion SpaceSaver Plus FSE- 610, Руководство по эксплуатации, Страница: 89 / 96

Troubleshooting
89 Operating instructions
Error no. Fault message displayed Description Action
710 • Vapour sensor defective Steam elimination is now controlled
solely by the software. This results
in higher water consumption. • Contact Customer service
• Water pressure too low As continuous fault message • Open the water valve
• If water valve not closed, contact
customer service
• Water pressure too low As sporadic fault message • Activate fewer appliances simul-
taneously in the kitchen.
• Contact Customer service
• No water in the siphon The siphon is insufficiently filled
with water. • Open the water valve
• 2 l (0,53 gal) Pour water into the
cooking chamber
• If the fault message does not dis-
appear, contact customer service
• Unit restarted after power
failure If there was no power failure in the
kitchen, an operating error may be
involved. For instance,
unintentionally switching on and off
while a cooking program was
running. • Power failure < 1 minute
• Confirm the power failure mes-
sage
• Continue the cooking program
• No cleaning necessary
• Power failure > 1 minute
• Cooking program cancelled
• Run the cleaning cycle
• WaveClean cancelled • Heed the explanations and instructions in the "Automatic cleaning
(WaveClean)" chapter
6.3 Nameplate
When contacting customer service, please always provide the following
data from the nameplate:
Serial number
(SN)
Type number
(TYP)
FM05-161-G