Henny Penny FlexFusion SpaceSaver Plus FSE- 610, Руководство по эксплуатации, Страница: 83 / 96

Cleaning and caring for the unit
83 Operating instructions
5.11.4 Starting automatic cleaning
INFORMATION
Never operate the unit in the automatic cleaning mode without a cleaning car-
tridge.
Requirements Water connection is open
The unit is on
Cleaning level selected
Cleaning cartridge inserted
Cooking zone temperature at 60 °C (140 °F)
Tap the "START STOPP" button.
The display shows the remaining time.
5.11.5 Canceling automatic cleaning
1. Tap the "Stopp" button.
Automatic cleaning is canceled.
Automatic rinsing starts and cannot be canceled.
Upon completion, a prompt appears to remove the cleaning
cartridge.
2. Remove the cleaning cartridge.
5.11.6 Ending automatic cleaning
CAUTION
Risk of chemical burns
Dripping liquid can contain chemically aggressive components; it is thus nec-
essary to take appropriate protective measures.
Prerequisite Automatic rinsing has stopped after the cleaning program was
cancelled or the cleaning time has elapsed
1. Open cooking chamber door.
2. Remove the empty cleaning cartridge.
3. Use the hand shower to thoroughly rinse away any remaining
cleaner or rinse aid.
4. Close the cooking chamber door.
After the cooking chamber door is closed, the cleaning
program is completed.
5. Use a gentle stream of water to flush away any drops of cleaning
water that have collected on the floor in front of the unit.
6. Open the cooking chamber door and leave it ajar until the unit is
used again.
This extends the service life of the door seal.
No moisture builds up in the cooking chamber.
FM05-161-G