Mobile Rope Measurement MSM 12
Henning GmbH
Page 5
2.0 / 3.2009
3
Control elements
Connections for rope load
sensors LSM1
Aerial connection
(optional)
Display with touch screen
USB connection
On / off switch
4
Preparations
Open the battery chamber on the back of the MSM12. Insert
the batteries as shown on the illustration opposite. Take care
that the batteries have the correct polarity. Improperly inserted
batteries may damage the device! If it is intended to store the
MSM12 for a long time, the batteries must be removed in order
to protect the device.
MSM12 with Bluetooth option:
Screw the factory-supplied aerial to the aerial connection. The aerial has a link
by
which it can be moved into a favourable transmission position. Generally it is favour-
able to place the aerial in an upright position. For transport and storage the aerial can
be unscrewed.
5
Connecting the MSM12 to the computer
The free of charge operating software for the MSM12 can be downloaded on our
HomepagThe drivers for the USB interface are installed together with the software, i. e., when
connecting the computer to the MSM12 using an USB-A-B cable the drivers are
