Mobile Rope Measurement MSM 12
Henning GmbH
Page 22
2.0 / 3.2009
9.2
Bluetooth pairing
In order to use the wireless connection between the MSM12 and the computer the
MSM12 must be paired with the
computer. Here th
e
pairing procedure under Win-
dows XP with Service Pack 2 is described. For other operating systems the adjust-
ments should be made correspondingly. As the PIN the rope load meter MSM12
uses the Bluetooth PIN
0000
(four times zero).
In order to connect the MSM12 to the computer, please switch it on. For this purpose
press the on / off switch of the device for minimum 3 seconds. Now, the display
shows the Henning logo.
Open the system control.
Search for the icon
and start the window with
a double click.
Click
. [Add…]
Ensure that the MSM12 is switched on and put the check
mark in the field
[Device has been set
up and can be recognized]
and click
. [Continue >]
The computer is now searching for Bluetooth devices
nearby.
