8 • Important: Always read and follow instructions.
Operation
ALWAYS make sure the 525 Tire Lift is not
touching the wheel assembly before using
the wheel balancer. Personal injury or dam-
age to the unit could result if neglected.
ALWAYS make sure to hold the wheel assy
UPRIGHT any time the wheel/tyre assem-
bly is on the WHEEL TRAY.Personal injury or
damage to the unit could result if neglected.
Do not leave WHEEL Lift in raised position
and in contact WITH WHEEL before initiat-
ing Wheel Balancing cycle
Before moving the WHEEL TRAY, make sure
the BASE TRACK area is clear of debris.
525 Light Duty Lift Operation
1.
Actuate the PEDAL to lower; making sure the
WHEEL CARRIER/TRAY is completely lowered before
loading.
2.
Use foot to slide the WHEEL TRAY to align with
the WHEEL RAMP.
3.
Roll the wheel assembly to load it onto the
WHEEL TRAY.
4.
Actuate the PEDAL to raise the wheel assembly;
centering it with the balancer stub shaft.
5.
Hold the wheel assembly upright while sliding
the WHEEL TRAY left until the wheel assembly is on
the balancer stub shaft, ready to be mounted on the
balancer.
6.
Secure the wheel to the balancer using suitable
mounting adapters.
7.
Actuate the PEDAL to fully lower the WHEEL
TRAY/CARRIER,ensuring the WHEEL TRAY clears the
balancer chassis during movement.
8.
Balance the wheel.
9.
Loosen and remove the hubnut, and any accesso-
ries blocking the removal of the wheel assembly.
10.
Actuate the PEDAL to raise the WHEEL TRAY/
CARRIER.
11.
Move the WHEEL TRAY left under the wheel
assembly.
• Do not activate the lift when the tire/wheel
assembly is rigidly attached. Ensure the lift
does not apply any lifting force on the bal-
ancer shaft.
• Damage can occur to the balancer and the
balancer can be lifted off its original position.
12.
Actuate the PEDAL so the WHEEL TRAY will
support the wheel assembly as it lifts.
13.
Remove the wheel assembly from the balancer
stub shaft.
14.
Hold the wheel assembly upright and slide the
WHEEL TRAY back away from the balancer.
15.
Actuate the PEDAL to lower the WHEEL.
16.
Unload the wheel assembly by rolling it out of
the WHEEL TRAY.
