Henkel AQC-XH, Руководство пользователя

Страница: 23 / 38

LG_XH_CNH_EFF_ALL_8520301_011.DOC Page 6 of 21
GROUND ENGAGING COMPONENTS

CUTTING EDGES & GUARDS:
Replace any broken cutting edges, unevenly or
excessively worn cutting edges, and broken or worn wear guards.

RUNNING GEAR:
Replace broken, worn, or missing running gear shoes, and any
damaged adjuster leg components. Grease internal threads and sliding members (it’s
best to di sassemble and grease directly; zerks aren’t as effective at g reasing these
areas).

HARDWARE
:
Replace missing or broken bolts. Proper torque is important! Use grade
8 plow bolts for steel cutting edges.
HYDRAULICS

HOSES:
Plug or c ap any Q C fittings or any open hose ends. Inspect ho ses for any
leaks or potential leaks. Secure hoses with hose clamps.

CYLINDERS:
Check for leaks, and any chrome rod dents or s cratches. Apply a light
coat of oil or grease on exposed rod surfaces.
FRAME AND MOLDBOARD

JOINTS:
Check pins, bushings, and pivot bolts for wear. Mak e sure all keepers are in
place. Make sure shear bolts and pins are same as original equipment (usually grade 2).
Some drivers don’t like replacing shear pins and will install grade 8 replacements to avoid
replacing during a storm. These items are designed to shear to protect the driver and the
equipment.
CHECK WELDMENTS FOR CRACKS.
CABLE AND SHEAVES (IF APPLICABLE)

CABLE:
Check cable thor oughly for fraying, kinks, and abno rmal wear. Make s ure
cable is pr operly routed and se ated in all sheaves. V erify that cable clamps have t he
proper torque and are in the correct orientation and spacing. Cable shall be checked prior
to each use or after every 8 hours, whichever comes first.

SHEAVES:
Verify that sheave, bushings and retaining pins are in good condi tion and
adequately greased. Make sur e that shea ves, bushings and pins do not have any
abnormal wear and rotate without restriction.
REPLACE WORN OR BROKEN PARTS FOUND BY ABOVE INSPECTIONS
END OF SEASON MAINTENANCE