Henkel AQC-XH, Руководство пользователя

Страница: 16 / 38

SAFETY
Lift Groups Safety Section 1-12
© 2009 Alamo Group Inc.
SAFETY
TRANSPORTING SAFETY INSTRUCTIONS AND PRACTICES
Battery posts, terminals and related accessories contain lead and lead compounds,
chemicals known to the state of California to cause cancer and birth defects or other
reproductive harm. Wash Hands after handling
.
(SNPM-23)
Avoid contact with hot surfaces on the bottom of the skid shoes or plow cutting
edges. Use gloves and eye protection when servicing hot components. Contact
with a hot surface can cause serious injury from burns or scalding.
(SNPM-24)
Remove the negative battery cable from the battery before performing any maintenance on
the electrical system to p revent an accidental circuit shorting and sparks. Sparks can
result in wiring damaged, fire or personal injury.
(SNPM-25)
Before conducting maintenance on the Snow Plow stop the truck or Power Unit, place the
transmission in the park position and set the parking brake. Turn the engine off and
remove the key to prevent inadvertent or accidental starting of the engine. Unexpected
engine start up or vehicle movement can result in serious bodily injuries or death.
(SNPM-27)
Transport the Truck, Power Unit, and Snow Plow only at safe speeds. Serious accidents
and injuries can result from driving this equipment at unsafe speeds. Become familiar with
the driving characteristics of the equipment and how it han dles before operating or
transporting on streets and highways. Make sure the Truck’s or Power Unit’s steering,
brakes, and wheels are in good condition and operate properly)
Before transporting the Equipment determine the safe transport speeds for you and the machine.
Make sure you abide by the following rules:
• Test the Truck or power unit and Snow Plow at a slow speed and increase the speed slowly. Apply the
brakes smoothly to determine the stopping characteristics of the Truck equipped with the Snow Plow. As
you increase the speed of the Truck, the stopping distance increases. Determine the maximum safe
transport speed for you and the equipment. When driving down a hill or on wet or icy roads, the braking
distance increases: use extreme care and reduce your speed. Do not operate the equipment with weak
or faulty brakes.
• Obey all traffic laws and regulations. Never exceed the posted speed limit.
• The Snow Plow has moved the center of gravity of the equipment forward. Use extreme caution when
transporting at highway speeds. Slow down for sharp corners or on slopes to avoid loss of steering con-
trol.
• Only transport the equipment at the speeds determined as safe and which allow for proper control of the
machine while driving and stopping during an emergency.
• When operating in traffic, use the Truck’s or Power Units directional indicator or signal lights to indicate
your movement. Always use the flashing warning lights and other equipped warning features to alert
motorist of your presence and slow moving speed when operating in traffic.
Be Aware of Traffic Around
You and Watch Out for the Other Guy.
(SNPO-09)