e Xte n do
®
Em ulation C omm and S e t Re fe r e nc e
Part No. D 684 112
Mod.Nr. 4 150813 LEV
Page 10 of 95
2.1.2 LF
Line feed
[Name]
Line feed
[Function]
This command prints the data already contained in the print buffer, then sets the
next-data receive position at the left most column on the next line.
[Code]
[0A]
16
[10]
10
[Description]
1. The “LF” command prints the data already contained in the print buffer, then sets the next-data
receive position at the leftmost column on the next line.
2. In the initial state, the line spacing is set to approx. 1/8 inch.
3. When there is no data in the print buffer, only a line feed operation is executed.
4. When different-height character typefaces are to be printed on the same line, these character
typefaces are arranged so that their bottom ends are aligned at the same level.
5. If line spacing during printing/line-feeding is shorter than the character height, a length equal to
the character height feeds the paper.
