HENGQUAN H400B Series, Руководство пользователя

Страница: 33 / 47

Parameter Default setting
Speed 101.6(127) mm/sec (4 or 5 ips) (203DPI)
76(101.6) mm/sec (3 or 4 ips) (300DPI)
Density 8
Label Width 4” (101.5 mm)
Label Height 4” (101.5 mm)
Sensor Type Gap sensor
Gap Setting 0.12” (3.0 mm)
Print Direction 0
Reference Point 0,0 (upper left corner)
Offset 0
Tear Mode On
Peel off Mode Off
Cutter Mode Off
Serial Port Settings 9600 bps, none parity, 8 data bits, 1 stop bit
Code Page 850
Country Code 001
Clear Flash Memory No
IP Address DHCP
Printer configuration will be restored to defaults as below after initialization.
4.3.4 Set Black Mark Sensor as Media Sensor and Calibrate the Black Mark Sensor
Please follow the steps as below.
1. Turn off the power switch.
2. Hold on the button then turn on the power switch.
3. Release the button when LED turns blue/purple after 5 blue blinks. (Any blue/purple will
do during the 5 blinks).

The LED color will be changed as following:
Purple

red (5 blinks)

purple (5 blinks)

blue (5 blinks)

blue/purple (5 blinks)

red/purple (5 blinks)

solid blue
4.3.5 Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor
Please follow the steps as below.
1. Turn off the power switch.
2. Hold on the button then turn on the power switch.
29