Hendi 225707, Руководство пользователя

Страница: 6 / 68

6
EN
quent amendments).
Discharge of combustion products - Gas type cook-
ing appliances must discharge the
combusted products through hoods connected to
the chimney flue or directly to the outside.
The hood must be positioned at least 700 mm far
from the working surface (Fig. b). Keep this
distance also when installing components or
shelves horizontally above the appliance. In case
a hood could not be installed, an electric ventilation
unit must be applied to the external part of
the room or to a window, provided that the room is fitted with openings for air circulation (the
current national installation norms and subse-
quent amendments) – (Fig. c). The electric
ventilation unit must ensure an air circulation rate
equivalent to 3-5 times the volume of that
room per hour.
Warning: an intense and prolonged use of the ap-
pliance may require additional aeration, which
could be achieved opening a window or increasing
the mechanical inlet power, where it exists,
consequently improving the airing efficiency.
Residual risks
- Keep away from the appliance unskilled personel.
- With hot oven, open the door carefully in order
to avoid violent hot fumes exit, that my
cause burning.
- The appliance contains electrical parts and must
never be washed with a jet of water or
steam.
- To avoid wrong installation, the right gas connec-
tion is showed on a label that identifies the
correct gas type to use. - The appliance is electrically connected: before at-
tempting any cleaning operation, cut power
to the appliance.
- Do not use the door handle to move the appliance
(the glass panel may break).
- The removable parts of the cooking top, after the
cleaning operation, must be placed
correctly in their housing in order to avoid anoma-
lous and dangerous functioning of the
burners.
GAS CONNECTION
Connect the appliance to a gas cylinder or mains
gas pipe according to the prescriptions of
standards (as per current national installation
norms and subsequent amendments). To connect gas, use an approved rigid metal pipe in copper or
stainless-steel (the current national
installation norms and subsequent amendments).
The appliance is equipped with threaded GJ