12
HENDEN – USER MANUAL
13
HENDEN – USER MANUAL
H2 Robotic Pool Cleaner
1.
Clean the filter panels with a hose.
1.
Dismantle the 4 panels using your
thumbs.
1.
Reassemble the filter panels.
1.
Insert the clean filter basket and
close the filter cover. The filter basket
handle will automatically fold down as
you close the cover.
MAINTENANCE
Periodic cleaning
To ensure longevity of your H2 Robotic Pool Cleaner, we recommend completing a deep
clean once a month. A deep clean consists of dismantling the 4 ultra-fine filter panels on
the basket, according to the following steps:
CLEANING THE IMPELLER
If you notice debris trapped in the impeller compartment:
Make sure the power supply is switched off and unplugged.
Clean the debris trapped in the impeller opening compartment, according
to the following steps:
Open the lid,
remove the basket
and remove any
debris.
Use a short screwdriver to remove the
two screws on the impeller cover.
Pull the impeller
cover backwards
to release it. Clean
the debris trapped
around the impeller.
Reassemble the
impeller cover.
OFF-SEASON STORAGE
If the H2 Robotic Pool Cleaner will not be in use for an extended period of time,
it is important to:
> Unplug the H2 Robotic Pool Cleaner from the external power source.
> Make sure that no water is left in the H2 Robotic Pool Cleaner. If water appears in the
unit, place upside down for 24 hours then return and continue the storage process.
> Thoroughly clean the filter basket and panels. Be sure to place them back in the unit.
> Roll up the cable so that it has no kinks.
> Store the H2 Robotic Pool Cleaner in a protected area out of direct sun/rain/frost,
at a temperature of between 5°—45°C / 41°—113°F.
1
2
3
4
1
2
3