8
HENDEN – USER MANUAL
9
HENDEN – USER MANUAL
H2 Robotic Pool Cleaner
OPERATION
Putting the H2 into the pool
Removing the H2 from the pool
1.
Place the H2 Robotic Pool Cleaner
into the pool. Release it and let it sink
to the floor of the pool. Make sure
that the floating cable is free of any
obstructions.
2.
Turn the power supply ON. The H2
Robotic Pool Cleaner will now operate
until it has reached the end of the
cleaning cycle. Note: the power supply
will turn off automatically after
3 hours.
Make sure the power supply is switched off and unplugged.
1.
Press the OFF button on the power supply and unplug from the power point.
Do not pull the pool cleaner from the pool using the cable.
6.
Using the floating cable, bring the
H2 Robotic Pool Cleaner to the pool’s
edge. Using the handle, remove the
unit from the pool.
7.
Place the H2 Robotic Pool Cleaner on
the edge of the pool and let the water
drain out.
ON
1
2
1
OFF
UNPLUG
✓
✗
2
3