HENAN SUWEI CreatBot, Руководство пользователя

Страница: 31 / 40

Start / End GCode
Software Operation
A B C
Step 1 : oad 2 models L
you want as
shown in figure [A ]
and . [B ]
Step 2 : , Fist click [A ]
then right click on
[B ] , you will get
the option dual :
extrusion merge ,
this will merge
both models into
one model . [C ]
Step 3 : Set parameters like ordinary single color model and save the GCode .
Tip
:
The model select first will print by main extruder
,
the right clicked one by second extruder
.
Dual Head Printing
The start and end gcode are the startup
and end procedure of the print , editing this
requires knowledge of GCode .
If you want to set the automatic heating
station after printing , you can remove the ";"
in the code "; M190 S50 ".
start . gcode is the start code of single
extruder , start2 . gcode is the start code of
double extruder, and so on.
Print Setting Of Different Filament
*
The data is only for reference, different environmental data will be different.F160 and F430 can print PEEK.
Add Multi Type Printer
You can add more than one
type of CreatBot to the software,
and easily switch between them
without re-config all the different
machine settings.
F160
Nozzle temperature Hot bed Plantform adhesion type Fully enclose or not
PLA 190~210 ℃ None/45℃ None/Raft Can open
ABS 190~210 ℃ 90 ℃ Brim/Raft Enclosed
Nylon 240~270 ℃ 100
Brim
/
Raft
Enclosed
HIPS 230~260 ℃ 100 ℃
None
/
Brim
Enclosed
PETG 230~260 ℃ 100 ℃
None
/
Brim
Enclosed
Flexible 210~230 ℃ None/45℃ None Can open
Wood 190~220 ℃ None/45℃ None Can open
PC 230 ~ 260 ℃ 100 ℃ Brim Enclosed
PEEK 380~430 ℃
Bed 120 ℃ / Air 70 ℃
None Enclosed
Software Operation
- 31 - - 30 -