HSMA / HDMA / HMMA PLAY Series
Mixer Amplifiers with Multi-Player
14
8. Mic 3 Line/Mic/Phantom Sel.
Same as point 5 but for Mic 3.
9. Mic 2 Combo Connector
Same as point 3 but for Mic 2.
10. Mic 2 Phantom Indicator
Same as point 4 but for Mic 2.
11. Mic 2 Line/Mic/Phantom Sel.
Same as point 5 but for Mic 2.
12. Fan
This opening allows the internal fan to reduce amplifier heating and preserve it
from overheating.
PLEASE DO NOT BLOCK
.
13. AC Power input with Fuse
Plug the power cord into an AC socket properly configured for your particular
model.
Note: If you happen to lose the AC line-cord, always use a three-pin
plug with a ground pin. The wire correspondence is as follow:
Cable
Pin
International
Brown
Live
L
Blue
Neutral
N
Yellow/Green
Earth
ATTENTION: Always connect the earth! Pay attention to your safety!
Before taking into operation for the first time, the installation has to
be approved by an expert.
In case of fuse burn, to prevent the risk of fire and damaging the unit, please use
only of the recommended fuse type as described below. Before replacing the fuse,
make sure the unit turned off and disconnected from the AC outlet.
Model
Fuse
HSMA-120D PLAY, HDMA-120D PLAY, HMMA-120D PLAY
F2AL 5x20mm
HSMA-240D PLAY, HDMA-240D PLAY, HMMA-240D PLAY
F4AL 5x20mm
HSMA-350D PLAY, HDMA-350D PLAY, HMMA-350D PLAY
F6AL 5x20mm