HSMA / HDMA / HMMA PLAY Series
Mixer Amplifiers with Multi-Player
12
24. Zone Attenuator and Led
This section features a zone attenuator knob and the related Led indicator. The
knob has 5 steps + Off position (counterclockwise). When the zone is off the
related Led is off.
4.3. Rear panel
1
2
3
4 5 6
9 10 11
12
13
14
15 16 17 18 19 20
8
7
1. 4-16Ω Overall Power Output 8. Mic 3 Line/Mic/Phantom Sel. 15. 100V Speaker Power Output
2. External Antenna
9. Mic 2 Combo Connector
16. Stereo Aux Output
3. Mic 4 Combo Connector
10. Mic 2 Phantom Indicator
17. Stereo Aux 1 Input
4. Mic 4 Phantom Indicator
11. Mic 2 Line/Mic/Phantom Sel.
18. Stereo Aux 2 Input
5. Mic 4 Line/Mic/Phantom Sel.
12. Fan
19. EMC 100V Input
6. Mic 3 Combo Connector
13. AC Power input
20. EMC Level Adjustment
7. Mic 3 Phantom Indicator
14. DC +24V Power Input
1. 4-16Ω Overall Power Output
This terminal allows the user to connect 4-16Ω speakers.
This power output is
controlled by Master Volume knob but it is not controlled by Zone knobs
.
RED
Terminal
BLACK
Terminal
It can be very useful, for instance, if, in addition to the 100V zone speaker lines,
you also need a local monitor and need to hear all signals no matter what zones
are active. It is also used in case of low-impedance speaker system instead of 100V
line. Of course, this output is not controlled by zone attenuators.
WARNING: the overall power of the amplifier must always be kept
in mind; this means that if, for example, total power of the speak-
ers connected to all zone outputs is 100W and the power amplifier is