HSMA / HDMA / HMMA PLAY Series
Mixer Amplifiers with Multi-Player
13
120W, you can add an additional load that does not exceed 20W @4
and 16 Ohm impedance. Also pay attention to polarity when connect-
ing speakers to this output: there is a positive terminal (+, red) and a
negative terminal (-, black).
2. External Antenna
Connect here the DAB+/FM antenna (included). You can also use this plug to con
-
nect external antennas and increase the DAB+/FM reception sensitivity.
3. Mic 4 Combo Connector
This Combo is for the use of both XLR and 1/4” Jack balanced/unbalanced Micro
-
phone or Line signals. You can connect mixers, DJ consoles, CD players, etc. The
input audio signal can be adjusted by using the Mic 4 knob on front panel.
Note: Set Mic 4 knob to minimum before connecting an audio signal.
Once the system is powered up, we recommend that the Volume set
to midway is a good starting point.
4. Mic 4 Phantom Indicator
This Led is lit when Line/Mic/Phantom selector n. 5 is on “Phantom” position. This
means that Mic 4 Combo connector de48V Phantom Power.
5. Mic 4 Line/Mic/Phantom Sel.
Set this selector to “Line” in case of line-level signals (such as CD players, Tuners,
Tablets, PC, Mobile Phones, etc.); set it to “Mic” in case of dynamic or condenser
microphones; set it to “Phantom”
only in case of condenser microphones that
requires a Phantom Power
.
WARNING: Please read the technical specifications of your condens-
er microphone before connecting. This mixer amplifier de48V
Phantom Power.
WARNING: Set Mic 4 knob to minimum before connecting the micro-
phone and switching the Phantom Power to on.
6. Mic 3 Combo Connector
Same as point 3 but for Mic 3.
7. Mic 3 Phantom Indicator
Same as point 4 but for Mic 3.