Helvi PC EVO 126, Инструкция по эксплуатации

Страница: 4 / 36

EN-2
PERSONAL PROTECTION
• Workers and their assistants must protect
themselves by wearing closed, non-flamma-
ble protection coveralls, without pockets or
rolled sleeves or legs. Any residue of oil or
grease must be cleaned from the garments
before wearing them. Only wear CE marked
garments suitable for arc welding and cutting
(Fig. 1):
1. Gloves;
2. Apron or jacket made of crust leather;
3. Gaiters to protect the shoes and the bottoms
of the trousers;
4. Protection shoes with steel toes and rubber
soles;
5. Mask (please consult the paragraph on light
radiations);
6. Crust leather sleeves to protect the arms.
the visible light and infrared and ultraviolet
radiations). The helmet or the mask must be
equipped with a protector whose degree of
opacity will depend on the welding or cutting
procedure and on the value of the electric arc
current, according to the values contained in
Table 1 (EN 169).
Figure 1
Caution: Make sure all protection gar-
ments are in good conditions and replace
them regularly in order to ensure perfect
personal protection.
LIGHT RADIATIONS
Warning: Never stare at an electric arc wi-
thout suitable eye protection (Fig. 2).
Figure 2
• Users must wear fireproof helmet or mask,
designed in such a manner as to offer protec-
tion to the neck and face (including the sides)
against the light of the electric arc (glare from
• The colored filter (inactinic filter) must be kept
clean at all times. Should it break or dete-
riorate (Fig. 3), replace it with a new filter,
with the same degree of opacity. The colored
filter must be protected against impact and
welding or cutting projections by means of a
transparent glass positioned on the anterior
part of the mask. This transparent glass must
be replaced whenever visibility is reduced du-
ring welding.
DIN
Taglio
Plasma
Elettrodi
Rivestiti
Elettrodi
Carbonio
Arc/Air
TIG
9 20 - 39A 5 - 19A
10 40 - 79A 125 - 174A 20 - 39A
11 50 - 149A 80 - 174A 175 - 224A 40 - 99A
12 150 - 249A 175 - 299A 225 - 274A 100 - 174A
13 250 - 400A 300 - 499 275 - 349A 175 - 249A
14 500A 350 - 449A 250 - 400A
DIN
MIG per
Leghe
Leggere
MIG per
Pezzi d’Ac-
ciaio
MAG
9
10 80 - 99A 80 - 99A 40 - 79A
11 100 - 174A 100 - 174A 80 - 124A
12 175 - 249A 175 - 299A 125 - 274A
13 250 - 349A 300 - 499A 275 - 349A
14 350 - 499A 500 - 550A 350 - 449A
Table 1
Figure 3
WORKING AREA
Welding or cutting operations must be carried out
in a sufficiently ventilated place, isolated from other
working areas. If this is not possible, anyone near
the person operating the welding machine and
their assistants must be protected by curtains and
transparent opaque screens, self-extinguishable and
in accordance with regulation in force (the color of
the screen will depend on the welding process and
on the value of the currents used), anti-UV goggles