21
Helvar uSee Installation and Set-Up Guide
9.2: Edit ‘Network Setup’ settings in Configuration settings screen
1.
On the Configuration settings screen, click ‘Network Setup’ (bottom of screen)
2.
The network settings will be displayed
3.
Click the ‘Edit’ button for the Router Network Connection (connection from uSee unit to the lighting router system).
Consult the network administrator or commissioning engineer for IP settings compatible with your LIGHTING ROUTER network.
4.
Edit the network settings , and click the green ‘tick’ icon, to save the settings.
Having changed network settings for the Router Network Adapter it may take several minutes for Workgroups on that
Ethernet network to be seen by the uSee unit. Refresh this page on a regular basis until the expected Workgroups appear
in the Workgroup Settings section.
