Installation & User Instructions
4 Channel Dimmer
HES99300
The Helvar Electrosonic HES99300 is a four channel
dimmer unit having a total current capacityof 10A. The
dimmer can control the following load types: incandescent
lamps, low voltage halogen lamps with dimmable
conventional and electronic transformers, 26 mm
fluorescent tubes or compact fluorescent tubes with Helvar
EL-FD electronic ballasts, and 3 wire dimming ballasts for
fluorescent tubes.
The dimmer can be controlled with the Ambience Master
Panels or from a Helvar Electrosonic Imagine system, or
from 0-10V analogue rotary controls or sliders. Remote
panels including one infra-red remote control can be
connected to the Master Panel.
Easy light level adjustment of the four channels is done
directly from the Master Panels. The minimum level and the
fade time adjustment of the dimmer is carried out at the
panel.
245
181
93
251
63
211
230
HES99300 4 CHANNEL DIMMER
Technical Data
Mains voltage:
200-250v AC single phase
100-130v AC single phase (to special order)
Mains frequency:
45 - 65 Hz
Mains quality:
all data is based on a pure sinusoidal mains supply,
Mains signalling filtering:
over 400 Hz mains signals are filtered
Output relay:
single 1 pole 10A output relay
Compensation of output voltage:
variation 3%, with supply voltage variation of 10 %
Nominal load:
2300 VA - max total load.
Power factor of load:
min. 0.5 inductive
Conformity & Standards
EMC:
Generic emission:
EN 50 081 part 1
Generic immunity:
EN 50 082 part 1
RFI:
EN 55 014, SETI T33-91 and VDE 0875 Teil 2
Safety:
Safety:
EN 60 950
Isolation:
4kV
IP rating:
305
Power consumption:
max. 12 W
Thermal protection:
transformer: resettable fuse; power devices: thermal sensing
Installation:
vertically mounted, four 5.0 mm mounting holes
Weight:
1.5kg
Operating conditions:
ambient operational temperature: 0 - +35 °C
storage temperature:
-10 - +70 °C
relative humidity:
max 90% humidity, condensation not allowed
Document Ref. EPD05183
(08.11.99)
ENGLISH
Part No. I380GB
issue 2
page 1
