HELVAR 435, Руководство пользователя

Страница: 15 / 31

Helvar 435 BACnet Gateway: User Guide 11
1.
Press , and then select Map points to display the BACnet Export Table, where you can
select Groups Router and Router Subnet device parameters from existing workgroups.
Note: The 920 router DMX subnet is not displayed as no export information is supported for
DMX devices.
2.4.1. Discover and select workgroups and devices
When you first install 435 BACnet Gateway devices, you
must assign the following:
•
An existing Helvar workgroup for Helvar routers
and Helvar routers subnet devices.
•
Groups to be discovered.
To discover existing workgroups and devices:
1.
Press Discover workgroups to populate the list of
Workgroup section
Discovered
workgroup and
detected devices
Point Mapping section
Points selected from
available devices in
workgroup
Configuration button section
Buttons to manage the
workgroup and map available
points
Workgroup
Router/Subnet/Device
deselection and
Message area
Deselection
and message
area
Discovered
workgroups