Helo ROCHER Скачать руководство пользователя страница 6

 

 

2.7  If the sauna heater will not heat up 

If the sauna heater will not heat up, please check the following:  

-

 

 The power is on; 

                  -    The fuses for the sauna heater are intact; 
                  -   Any error messages on the control panel; In case of an error message, please refer to   
                      the control panel operating instructions.  
 

3.  Instructions for the installer 

THE PERSON INSTALLING THE SAUNA HEATER SHOULD LEAVE THESE INSTRUCTIONS 
IN THE PREMISES FOR THE FUTURE USER. 

3.1  Preparing for sauna heater installation 

 

Check the following before installing the sauna heater: 

1. The ratio of the heater's input (kW) and the sauna room's volume (m

3

). Volume/input 

recommendations are presented in 

Table 2

 

on page 8

. The minimum and maximum volumes must not 

be exceeded. 

2. The sauna room ceiling must be min 1900 mm high. 

3. Glass and stone surfaces will extend the pre-heating period. Each square meter of glass or stone ceiling 
or wall adds 1.2m

3

 to the sauna room's volume in terms of needed heater input. 

4. Check 

Table 1

 

on page 8

 for a suitable fuse size (A) and the correct diameter of the power supply cable 

(mm²) for the sauna heater in question. 
 
5. Conform to the safety clearance around the sauna heater as specified in 

Table 2

 

on page 8

. There 

should be enough room around the sauna heater for maintenance purposes, a doorway etc. 

6. If the the heater is integrated in the sauna benches, the bench model must allow lifting of the lower 
bench and its frame without tools. The warranty will not cover dismantling and reassembly of sauna 
benches. 

 
3.2  Installing the sauna heater 

 
Follow the safety clearance specifications

 in table 2 and images 3 and 4 on pages 8 and 9 

when 

installing the sauna heater.  
The sauna heater is a free-standing model. The base must be solid, because the sauna heater weighs about 
120 kg. 
The sauna heater is levelled by the adjustable legs. 
The sauna heater is fixed on the floor from its legs by the provided metal fasteners (2 pcs). This will keep 
the safety clearances intact during use. 
Walls or ceilings must not be clad light-weight cladding, such as incombustible protecting board, because 

they may cause a fire hazard.  

A single sauna heater is allowed per one sauna room.

Содержание ROCHER















Отзывы: