Helo IG-630 E300-X, Инструкция по эксплуатации

Страница: 7 / 15

5. Place the Bench Support panel first and then place the Bench surface panel into the
sauna rooms with more than one bench, rotate the wooden bench supports
※
nel down the wooden supports with the heater facing out.
※
to the floor
※
ard the Back
※
the back of Bench Support Panel to the Right
※
ack of Bench Support Panel to the left
Pla Support Panel and slide toward the Back
sauna room.
※
On larger
away from the side walls.
Slide the Bench Support Pa
※
Make sure the two side slots of the Bench Support Panel slide completely into the
corresponding grooves of the wooden supports . (Refer to picture 1)
Connect the power connector from the back of Bench Support Panel
Panel. Ensure the connection is completely fastened(Refer to picture 2)
Place the Bench Surface Panel on the Bench Support Panel and slide tow
Wall until half. (Refer to picture 3)
Connect the power connector from
Wall Panel. Ensure the connection is completely fastened; attach cover with the
provided screws. (Refer to picture 4-5)
Connect the power connector from the b
Wall Panel. Ensure the connection is completely fastened; attach cover with the
provided screws. (Refer to picture 4-5)
ce the Bench Surface Panel on the Bench
Wall until flush to the Back Wall.
Picture 1 P icture 2
IG 630-EX/E300-X-3 6 09/18/09