Quick Start Guide REX 100 WAN|WiFi
4
2.3 Connection
The REX 100 must be supplied with 24 V DC at the wide range input 18 – 30 V DC
via the provided connector plug.
The terminal (FG) is for the functional ground. Connect this correctly with the refer
-
ence potential.
2.4 Digital inputs IN1 and IN2
The alarm inputs can be activated with potential-free switches, buttons or relay
contacts. E-mail recipients who need to be notified are configured and activated via
the alarm management in the myREX24 V2 portal. Depending upon the setting, it is
possible to initiate the establishing of a connection to the myREX24 V2 portal via IN1.
The use of these functions is optional.
The green PWR LED lights up when the supply voltage is switched on. The boot pro
-
cess starts following the internal system check (duration of approx. 25 sec.), which
is indicated by the blinking RDY LED (for approx. 90 sec.). The REX 100 is ready for
operation as soon as the RDY LED lights solid.
3. Access to the myREX24 V2 portal
REX 100 routers can be fully configured using the myREX24 portal. A secure connec
-
tion with the portal is required to this purpose:
-
For complete hardware project planning of a REX 100 router, the remote client
software shDIALUP must be used in order to establish a VPN connection.
-
Alternatively, you could also create the configuration with an HTTPS-secured direct
call up from your browser. The call up is realized with the following URL: https://
v2.myREX24.net.
Please always use your myREX24 V2 portal access data to log in. You can find further
information in the manual for the myREX24 V2 portal.
The various ways to transfer the configuration you have created to the REX 100 are
described in this Quick Start Guide.
