Quick Start Guide REX 100 WAN|WiFi
11
5.2.2 Calling up the “First Start Assistant” through the browser
You can also determine the Internet access of the REX 100 directly in the web inter-
face of the router via the “First Start” website. This is relevant in the event that the
REX 100 has not yet been confi gured through one of the other confi guration paths
(with the PC via LAN or via USB stick).
In the delivery condition, the REX 100 has the LAN IP address setting 192.168.0.100
with the subnet mask 255.255.255.0. In order to reach the REX 100 through your
local LAN connection, the network setting of your PC may need to be adjusted. To
this purpose, open the properties of your LAN connection and adjust the IPV4 ad-
dress and the subnet of the computer (e.g. IP: 192.168.0.99/SNM: 255.255.255.0).
The website can then be reached for subsequent confi guration with the URL:
http://192.168.0.100.
Authenticate yourself with the user:
helmholz
and the password:
router
. The First
Start Assistant then opens.
Note:
Make sure that there are no address space confl icts with any other network
interfaces (do not assign the same IP address more than once) in order to be able to
communicate with the REX 100 unit properly.
In the case of wired models, access to the Internet can only be established through
the “External Router” on the system side. To this purpose, the WAN interface must be
connected with the customer server/DSL modem.
In the case of WLAN variants, you must have the login data for the access point.
If you select “DHCP”, no IP address adjustments need to be carried out. “DHCP”
is the usual setting for WLAN participants. The settings for access through a proxy
server can also be stored in this input screen as needed.
Note:
It may be necessary to approve the MAC address of the REX 100 in the higher level
DSL modem or the fi rewall. If it should not be possible to establish a connection, please
ask your network administrator whether a MAC address fi lter has been activated.
REX 100 WAN
The values for the statically set WAN port are established by the responsible network
administrator. The settings for access through a proxy server are also stored in this
input screen as needed.
