Quick Start Guide REX 100 WAN|WiFi
15
5.3
Transfer configuration via a local LAN connection
In order to transfer the configuration from a PC through a local LAN connection, the
configuration PC must allow for two simultaneous network connections:
1. The PC must be active in the Internet with the shDIALUP software
2. The PC and the REX 100 to be configured must be connected in the same network
via LAN
In practical terms this is possible as follows:
-
PC with two network adapters/Ethernet connections
-
Notebook with WLAN and Ethernet connection
-
PC or notebook with additional switch at the workspace
LAN
1. Log in via shDIALUP
3. Search for REX 100 in the LAN
4. Transfer the configuration
2. Create/edit and download the
REX 100 configuration
LAN
