Helmer Scientific Cart and Pedestal
User Guide
360382/B
7
Remove Leveling Legs (if installed)
1.
Tilt or raise the refrigerator or freezer 1"-2" off the floor to gain access to the casters for removal.
Note
Use of a pallet jack or forklift is recommended for safety. To prevent damage to the unit, push the pallet jack (or forklift)
under the refrigerator or freezer so the forks extend beyond the opposite side of the base.
2.
Place wood blocks under the unit with the widest portion of the blocks resting on the floor to help secure the refrigerator
or freezer.
3. Using your hand, unscrew the 4 leveling legs located in the four corners of the unit (Figure 6).
Figure 6
Installing Pedestal
1. Position the pedestal in an open area.
2. Using a #2 Phillips screwdriver, remove the screws securing the back and side panels (4 per panel) of the pedestal
(Figure 7).
Figure 7
3. (Gen 3 models only) Using a #2 Phillips screwdriver, remove the screws (4) securing the front cover of the pedestal
(Figure 8).
Figure 8
