Helmer Scientific Cart and Pedestal
User Guide
360382/B
6
3
Undercounter Pedestal Installation
3 .1
Required Parts
♦
401625-1
Undercounter Pedestal Kit
(includes 322474-1, Undercounter Wall Mount Bracket and 322390-1, Wall Mount Bracket)
3 .2
Required Tools
♦
7/16" wrench or socket for 1/4"-20 screw
♦
9/16" wrench or socket for 3/6"-16 screw
♦
#2 Phillips screwdriver
3 .3
Location Requirements
♦
Has a minimum 3" of space behind the refrigerator or freezer for clearance and feature access.
3 .4 Procedure
CAUTION
•
Power the unit off and disconnect AC power before performing this procedure.
• The chamber temperature may increase above the allowable temperature range for stored inventory. Take precaution
to protect items in the chamber from extended exposure to adverse temperature.
• Multiple undercounter units may not be stacked on top of the pedestal.
• The pedestal must sit using leveling legs and should never use caster wheels.
• The pedestal kit may only be used with Helmer undercounter units.
• Due to the size and weight of the undercounter units, extreme care must be taken when positioning the unit to allow
accessibility to the underside.
Remove Caster (if installed)
1.
Tilt or raise the refrigerator or freezer 1"-2" off the floor to gain access to the casters for removal.
Note
Use of a pallet jack or forklift is recommended for safety. To prevent damage to the unit, push the pallet jack (or forklift)
under the refrigerator or freezer so the forks extend beyond the opposite side of the base.
2.
Place wood blocks under the unit with the widest portion of the blocks resting on the floor to help secure the refrigerator
or freezer.
3. Using a #2 Phillips screwdriver, remove the 4 screws securing each caster to the base of the unit (Figure 5).
Figure 5
