20
HM1734-WM STRAIN GAGE INPUT MODULE
CALIBRATING WITH KNOWN LOAD (AUTO-CAL) Ver. 4.17
1)
Set known weight for channel at REF WEIGH VALUE.
2)
Tare-0 (with no weight on cell/scale).
3)
Apply known load (test weight) to load cells/ scale.
4)
Set AUTO CAL ENABLE BIT on for CH1 (CH2 if applicable).
5)
To ensure accuracy repeat the steps above.
6)
mV/V values at Ch1_Autocal_mV/V
Ch2_Autocal_mV/V
