Reverting to the earhook style
Here’s how to change the headset back into the earhook style.
1. Hold the head band with the foam cushion facing you. See Figure 8.
2. Position your fingers behind the
outer portion of the head band
mounting ring (covered by the foam
cushion).
3. With your thumbs on the receiver,
push outwardly until the head band
pops free of the receiver.
4. Align the earhook mounting ring
over the receiver with the swivel
stem notch over the mounting post
on the receiver. See Figure 9.
5. With your fingers positioned
behind the receiver, use your
thumbs to push the earhook
mounting ring until it snaps
onto the receiver.
Converting the Solo
Convertible headset
Converting to
the head band style
The Solo Convertible headset can be
equipped with a fully adjustable,
lightweight head band. You need to
remove the earhook first.
1. Position the receiver with the speaker
side up and the microphone boom
at 12 o’clock. See Figure 6.
2. Place both your thumbs on the center
of the receiver with your index
fingers wrapped around the swivel
stem and cable strain relief.
3. Push your thumbs inward until the
earhook pops free of the receiver.
4. Align the mounting post on the
receiver over the head band mount-
ing ring (covered by a foam cushion).
The mounting post fits into a notch
on the head band mounting ring. See Figure 7.
5. Place your thumbs over the boom turret.
6. Place your fingers behind the head band (on the foam cushion), and use
your thumbs to pop the head band onto the receiver.
6
7
Figure 8
Figure 9
Figure 6
Figure 7
