Switching from ear to ear
with the ear hook
Rotate the microphone boom 180°, and
swing the earhook to the other side of the
speaker. See Figure 3. Note: the speaker
will not rotate 360 °. Do not force it past
its stop position.
Wearing the head band
Refer to the Converting to the head band
style section to learn how to change your
Solo Convertible from earhook to head
band wearing style.
Position the headset lightly on your head.
See Figure 4. The click-stop head band
lengthens and shortens to the desired
length for a custom fit (pull to lengthen,
push to shorten). The head band retains
its length and will not need adjusting
each time it is put on. The stabilizer
cushion rests just above the ear on the
side of your head opposite the speaker.
Refer to the Positioning the microphone
section for more information.
Switching from ear to ear
with the head band
To accommodate left or right ear wearing
styles, rotate the microphone boom over
the head band. See Figure 5. Note: do not
force the microphone boom beyond the
built in stops.
Wearing the Solo Convertible headset
Wearing the earhook style
Note: if you wear glasses, we recommend
that you remove them before you put on
your headset.
The Solo Convertible headset already
has the flexible earhook installed. See
Figure 1. The earhook is worn on the
ear, and can be reshaped for a comfort-
able and secure fit. Note: black areas of
the earhook cannot be reshaped. You can
reshape only the gray areas.
1. Straighten out the earhook so that it
points away from the speaker. See
Figure 2.
2. Swing the hook away from the
speaker, and slide the Solo Convert-
ible earhook behind your ear until
the top of the hook rests on the
uppermost part of your ear.
3. Adjust the flexible portion of the
hook (gray area) with your thumb
until it rests comfortably along the
back of the ear.
4. Lightly press the speaker against
your ear for proper positioning.
5. To remove, simply lift the Solo Convertible off your ear. The Solo Convertible
earhook retains its custom contouring for the next time you put it on. Just
slip it into place and gently snug up the flexible portion of the hook.
Refer to the Positioning the microphone section for additional information.
4
5
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
