Hellermann Tyton TT431, Руководство по эксплуатации

Страница: 20 / 414

Operating Instructions • Thermal transfer printer TT431 • 03-2019 • 556-00400
Taking out of operation
20
10 Taking out of operation
DANGER
Danger of lethal electric shock!
There is a risk of lethal injury when touching live
components.
f Switch off the device before maintenance work.
f Pull the power plug out of the socket.
10 .1 Taking the device out of operation
Proceed as follows:
1 Switch off the device using the main switch.
2 Pull the power plug of the device out of the socket.
3 Shut down the PC or notebook.
4 Disconnect the USB cable from the PC or notebook.
5 Disconnect the USB cable from the device.
6 Disconnect the power cable from the device.
; The device is stopped.
10 .2 Putting the device back into operation
Proceed as follows:
1 Start the PC or notebook.
2 Connect the power cable to the device.
3 Connect the USB cable to the device.
4 Connect the USB cable of the device to the PC or
notebook.
5 Connect the power cable of the device to a power
socket.
6 Switch on the device using the main switch.
; The device is ready for operation.
11 Disposal
After termination of use, the purchaser or the operator
must properly dispose of the device including the
accessories.
The purchaser or the operator releases HellermannTyton
GmbH from the obligations according to paragraph
10 passage 2 of the German Electrical and Electronic
Equipment Act (Return obligation of the manufacturer)
and from any associated third-party claims.
This device was manufactured according to the current
environmental protection standards. The materials can be
separated and recycled.
f Observe the national regulations for the disposal of
recyclable fractions, electronic parts and batteries.
f
Do not dispose of the device with domestic waste.
f Bring the device to a local collection point or recycling
centre.
f If necessary, contact your local environmental office.
12 Technical data
TYPE
Content Article No .
Thermal transfer printer
TT431
1 556-00400
Printing method Thermal transfer printing
Print resolution 300 dpi
Print speed up to Up to 150 mm/s
Print width up to 105.7 mm
Material
Labels or continuous material from roll,
reel or fanfold labels, heat shrink tubing
and identification plates
Energy supply 100 - 240 V
Rated input voltage 100 - 240 V AC ~ 50/60 Hz, PFC
Maximum rated input
power
150 - 300 W
Input fuse max. 1.6 AT
Interfaces
RS232 C, USB 2.0 Hi-Speed Device for PC
connection, Ethernet 10/100 Base-T: LPD,
IPv4, IPv 6, RawIP Printing, DHCP, HTTP,
FTP, SMTP, SNMP, TIME, NTP, Zeroconf,
SOAP-Webservice, 1 x USB Host for ext.
control panel, 2 x USB Host on the rear
side, keypad, barcode scanner, USB
memory device, USB Bluetooth adapter,
WiFi, peripheral port USB Host
System requirements
PC or notebook with Windows Vista
Server 2008®, Windows 7® Server
2008®, R2 Windows 8® Server 2012®,
Windows 8.1® Server 2012®, R2
Windows 10® Server 2016®
Dimensions (W x H x D) 253 mm x 189 mm x 322 mm
Weight 4 kg
Specification ICES3, CE, FCC class A, CB, c UL
Material
Label width
Single-track 10 - 116 mm
Multi-track 5 - 116 mm
Wide carrier material 9 - 120 mm
Continuous material
width
5 - 120 mm
Continuous heat shrink
tubing width
5 - 85 mm
Label height without
backfeed above
5 mm
Label height up to 2000 mm
Supply roll outer
diameter up to
152 mm
Supply roll core diameter 38.1 - 76 mm
Colour ribbon
Roll diameter up to
72 mm
Core diameter 25.4 mm
Variable feed length up
to
360 m
Width up to (in
accordance with the
width of the material)
114 mm
All dimensions in mm. We reserve the right to make technical changes without notice.