9.
The RED LED indicates the RHYTHM wind mode. In this mode the fan will blow air in three wind
levels; HI, MED and LOW. It cycles from LOW to MED, MED to HI, then, HI to MED and MED to LOW.
10.
The GREEN LED indicates the SLEEP wind mode. In this mode the wind speed steps down
automatically by one level every 30 minutes and finishes on LOW speed. (If the TIMER is set, it will
switch off automatically).
11.
The ORANGE LED indicates the RHYTHM SLEEP wind mode. In RHYTHM SLEEP wind mode the fan
blows LOW, MED or HI wind. (If the TIMER is set, it will switch off automatically).
12.
Press ON/SPEED button to turn off the fan.
Care & Cleaning
To make cleaning easier, you can dismantle some parts of your fan.
1.
Your appliance must be switched OFF via the main power supply and unplugged before proceeding
with any dismantling or cleaning.
2.
Use a small screwdriver or other suitable tool to remove the grill screw and nut (19). Remove fixing
clips around the grill.
3.
Remove the front grill (1)
4.
Turn the fan blade nut (2) CLOCKWISE (as indicated on the knob) and remove it completely.
5.
Remove the fan blade (3) by pulling blades from the base carefully.
6.
Unscrew the rear grill collar nut (4) COUNTER CLOCKWISE that holds the rear grill.
7.
Remove the rear grill (5).
8.
Clean the housing with a damp cloth, a vacuum cleaner or a dusting brush.
9.
We recommend lightly running a vacuum cleaner brush nozzle over the fan grill to remove any dust
or dirt that may have accumulated.
•
Never use flammable or abrasive cleaning agents such as benzene or spirits to clean the
appliance.
•
Never immerse the appliance in water!
10.
Follow assembly instructions after cleaning is complete.
Specifications
Model
Description
Voltage
Frequency Wattage
RPF50CR
50cm Pedestal Fan with Remote Control
220-240V~ 50Hz
90W
Australian Customer Service
GAF Control (Sales) Pty Ltd
P.O Box 19
Altona North Victoria 3025
Phone: 1300 659 489
Hours: 9am-5pm (EST) Mon-Fri
www.gafcontrol.com.au
*This product may vary slightly to the product illustrated due to ongoing product development.
