Fig.5
Fig.6
Fig.6
BEFORE FIRST USE
1. Before first use, carefully unpack the Blender and its attachments and remove any packaging material,
labels or stickers. Clean all parts except the motor base. Handle the blade with extreme care as it is very
sharp.
2. The jug assembly (including the filler cap, lid, seal ring 1, jug, seal ring 2 , blade assembly and jug base)
has already been assembled into the motor unit. Disassemble to wash all detachable parts except the
motor unit.
3. Once all parts have been cleaned and dried thoroughly, reassemble the blender.
4. Turn the jug upside down on a level surface. Place the seal ring 2 and blade assembly onto the jug (See
Fig. 3).
5. Holding the jug handle, place the jug base onto the jug bottom and secure the base by turning it clockwise
until tight (See Fig.4)
6. Turn the jug back upright. Wrap the seal ring 1 around the lid bottom and put the lid onto the jug assembly.
Place the filler cap exactly into the lid by slotting the grooves on both sides of the cap, into the slots on the
lid. Turning the cap clockwise until tight (See Fig. 5).
7. Finally, place the assembled jug onto the motor unit by aligning the strip on the assembled jug base. (See
Fig.6
）
CAUTION: Jar is now secure. Do not try to twist the jar onto motor unit.
Fig.3
Fig.4
