CARE & CLEANING
This product contains no user serviceable parts.
1. Before cleaning, unplug the blender from the power outlet.
2. For easier cleaning, always rinse/wash immediately after use. Do not let food dry in the jar assembly, as
this will make cleaning extremely difficult.
3. Pour a little warm soapy water into the jar and press the “Low Pulse’ button and let the blender run for a
few seconds. Press the ‘Off’ button and then empty the jar.
4. Dismantle all detachable parts. Lift the jar assembly off the motor unit.
5. Wash the jug and blades using warm soapy water, then rinse thoroughly.
The blades are very sharp, so
please handle with care.
6. Leave the jug to dry upside down, and away from children.
7. Wipe the motor base with a damp cloth and dry thoroughly. Remove any stubborn spots by rubbing with
non-abrasive cleaner.
CAUTION: Never immerse the motor unit in water or any other liquid.
CAUTION: Do not use rough scouring pads or cleansers on parts or finish.
CUSTOMER SERVICE
Australian Customer Service
GAF Control (Sales) Pty Ltd
P.O Box 19
Altona North Victoria 3025
Phone: 1300 659 489
Hours: 9am-5pm (EST) Mon-Fri
www.gafcontrol.com.au
*This product may vary slightly to the product illustrated due to ongoing product development.
