HELKAMA HPK258SB SS, Руководство пользователя, Страница: 18 / 76

EN - 16 -
If your freezer is not operating:
• Are there any electrical faults?
• Is the plug fully in the socket?
• Is the plug fuse or the mains fuse blown?
• Is there any fault in the socket? Examine this by plugging your freezer into a socket
which you are sure is working.
Temperature Warning:
The temperature display flashes “LF” and an audible warning sounds when the temperature
in the freezer is too high.
A rise in the temperature may be caused by;
• Frequent door opening for long periods of time
• Loading with large quantities of warm foods
• High ambient temperature
• An error with the appliances.
Check Warnings;
Warning codes are displayed in the freezer indicators if an incorrect temperature is detected
in the freezer or when a problem occurs in the appliance.
Also a warning sound is heard.
The problem code and audible alarm will continue until you press the SET or MODE button.
When you press one of these buttons, the audible alarm will stop immediately and the “LF”
warning will disappear in 15 minutes. You don’t have to call your service. This condition may
occur due to the reasons given above. You can keep storing your foods in your freezer. If
the “LF” warning does not disappear an hour after pressing the button, call your service and
do not re-freeze any thawed food. Thawed food must be eaten quickly
If your freezer is operating too loudly:
Normal Noises
Cracking (Ice cracking) Noise:
• During automatic defrosting.
• When the appliance is cooled or warmed (due to expansion of appliance material).
Short cracking: Heard when the thermostat switches the compressor on/off.
Compressor noise: Normal motor noise. This noise means that the compressor is
operating normally. The compressor may cause more noise for a short time when it is
first activated.
Bubbling noise and splash: This noise is caused by the flow of the refrigerant in the
tubes of the system.
Water flow noise: Normal flow noise of water flowing to the evaporation container during
defrosting. This noise can be heard during defrosting.
WARNING
TYPE
MEANING REASON REMEDY
LP Low voltage
Freezer switches to
the standby mode
when the voltage
supply falls below
170 Volts.
This feature prevents the
compressor from getting
damaged due to low voltage.
Freezer will start operating
automatically when the
voltage restores to the
required level.