13
General installation instructions for HELIX
components
To prevent damage to the unit and possible injury,
read this manual carefully and follow all installa-
tion instructions. This product has been checked
for proper function prior to shipping and is guaran-
teed against manufacturing defects.
Before starting your installation, disconnect
the battery’s negative terminal to prevent
damage to the unit, fire and / or risk of injury.
For a proper performance and to ensure full war-
ranty coverage, we strongly recommend to get this
product installed by an authorized HELIX dealer.
Install your HELIX P ONE MK2 in a dry location
with sufficient air circulation for proper cooling of
the equipment. The amplifier should be secured
to a solid mounting surface using proper mounting
hardware. Before mounting, carefully examine the
area around and behind the proposed installation
location to insure that there are no electrical ca-
bles or components, hydraulic brake lines or any
part of the fuel tank located behind the mounting
surface. Failure to do so may result in unpredict-
able damage to these components and possible
costly repairs to the vehicle.
General instruction for connecting the HELIX
P ONE MK2 amplifier
The HELIX P ONE MK2 amplifier may only be in
-
stalled in vehicles which have a 12 Volts negative
terminal connected to the chassis ground. Any
other system could cause damage to the amplifier
and the electrical system of the vehicle.
The positive cable from the battery for the com
-
plete system should be provided with a main fuse
at a distance of max. 30 cm from the battery. The
value of the fuse is calculated from the maximum
total current input of the car audio system.
Use only suitable cables with sufficient cable
cross-section for the connection of HELIX
P ONE MK2. The fuses may only be replaced
by identically rated fuses (4 x 30 A) to avoid
damage of the amplifier.
Prior to installation, plan the wire routing to
avoid any possible damage to the wire harness.
All cabling should be protected against possible
crushing or pinching hazards. Also avoid routing
cables close to potential noise sources such as
electric motors, high power accessories and other
vehicle harnesses.
Congratulations!
General instructions
Dear Customer,
Congratulations on your purchase of this
innovative and high-qual ity HELIX product.
Thanks to more than 30 years of experience in
research and development of audio products the
HELIX P ONE MK2 sets new standards in the
range of amplifiers.
We wish you many hours of enjoyment with your
new HELIX P ONE MK2.
Yours,
AUDIOTEC FISCHER
en
