Helios SR100Hi Series, Руководство пользователя

Страница: 11 / 12

11
www.heliosps.com
SR100Hi Series - 100 W DC UPS
11. Technical Specifications
Output power 100W
Input Voltage 180V - 264VAC 45 - 65Hz
Output Voltages 12V, 24V, 30V, 36V, 48 VDC
Voltage Adj. Range 85% - 105% of Vout
Overcurrent protection Constant current limit under overload and short circuit conditions
Isolation
Input – earth – 2.5KVdc
Output – earth - 500Vdc
Efficiency > 85%
Operating temperature - 20 to 50 °C ambient at full load
Humidity 0 - 95% relative humidity non - condensing
Cooling Natural convection
LVD Low Voltage Disconnect
LED Indication
Green: Batt OK
Green: Power OK
Alarms Relay
Form C contacts 30VDC,2A/110VDC,0.3A,125VAC, 0.5A
AUX (Activated by BCT)
POWER (main fails, PSU fails)
BATTERY (batt missing , batt low, BCT fail)
Temp. Compensation Temperature sensor on 1.7m lead with adhesive pad: - 4mV/ °C / cell ± 10%
Battery Charge Current Limit Customizable on request.
Reverse Polarity Battery reverse connection will open internal fuse (and produce alarm)
Battery Monitoring
Detects for presence of battery on start up, then every 60 minutes when charge current
< 200mA
Battery Circuit Protection Electronic circuit breaker (ECB) operates under the following conditions:
- Low Battery Volts: Battery Voltage drops to 1.67V/cell
Overload: Max load must not exceed 110% of rated current. Peak loads must be
connected to B+ & B– terminals. Not suitable for N+1 connection.
Short Circuit: <2ms, backed up by fuse
AC input connector IEC60320— C13 10A input socket (similar to PCs etc)
DC Connections Plug - in style socket & mating screw terminal block: (max. wire 2.5mm² / way)
Alarm connections Plug in screw terminal block
Enclosure Zinc plated & powder coated steel
Dimensions 147W x 177D x 62H (± 1mm)
Weight 0.95 Kg
STANDARDS
EMC To CISPR 22 / EN55022 class A
Safety To IEC950 / EN60950 / AS/NZS3260