Installation and operating instructions
Compact ceiling-mounted units KWL EC 220/340 D
11
GB
3.3
Metal trays
In order to prevent the fans letting in condensation water, metal trays are installed in the unit underneath
the left and right motor unit.
NOTE
☞
The metal trays prevent the accumulation of condensation water in this area and their correct
positioning must be checked upon delivery and during installation or maintenance work (see
Fig.34/35).
Perform visual inspection: There must be no water in the metal trays!
ATTENTION
☞
3.4
Condensation outlet in the unit
3.5
Terminal box
The side inspection guarantees free access to the terminal box (Fig.36) and the electronic components
(fuse or DIP switch settings (Fig. 37)).
The terminal box is located on the left side of the unit. Loosen the screws (Fig.36) and remove the cover.
3.6
Removal of bypass module
In order to remove the bypass module (incl. servomotor), disconnect the electrical connectors (Fig.38).
Then pull the bypass module out of the unit (Fig.39).
