Helios CURIO, Руководство пользователя

Страница: 63 / 76

63 | H E L I O S
THREADING THE TANK/ CYLINDER STRAPS
(Standard) When the Curio wing & backplate assembly is installed
with a single tank adapter (STA) :

Place the tank strap flat so that the HELIOS logo is facing up.
The Velcro should be facing down on the left and the CAM
buckle should be to your right

Thread the Velcro end of the tank strap through the top slots of
the single tank adapter (STA)

Slide in the rubber friction pad on the tanks strap (Velcro end).
The rubber friction pad grooved surface is on the opposite side
of the Velcro

Repeat above steps to install the second tank strap to the
bottom slots of the single tank adapter.
(Optional) When the wing & backplate assembly is installed without a single tank adapter (STA) where the
wing is directly mounted to the backplate using nuts & bolts:

Place the tank strap flat so that the HELIOS logo is facing up.
The Velcro should be facing down on the left and the CAM
buckle should be to your right

Loop one end of the friction pad. Slide the friction pad (with one
end looped) close towards the CAM buckle. Note the wide center
of the friction pad should be facing up (grooves facing you).
Install the friction pad on the left or right sides of the tank strap. It
can also be installed underneath the cam buckle.

Starting with the top right oval slot, insert the Velcro end of the
strap. Remember the Velcro end should be facing down

Push in the strap through the backplate slot

Flip the wing to the front. Pull the tank strap and insert the Velcro
end to the right adjacent tank strap slot on the backplate

Flip the wing to the back. Pull out the tank strap from the left oval
slot of the wing

Loop the remaining end of the friction pad and center the friction
pad to the spine of the wing. If the SS Stabilizer bar is installed,
do not install the friction pad on top of the stabilizer bar (install
the friction pad on the left or right of the tank straps)

Repeat above steps for the lower slots of the wing
CAUTION: CURIO Buoyancy compensators are designed to use two tank / cylinder straps securely
tightened to the tank/ cylinder.