Helios CURIO, Руководство пользователя

Страница: 62 / 76

62 | G E M M A T E C H N I C A L
SINGLE TANK ADAPTER (STA), WING, BACKPLATE ASSEMBLY

Insert the 30mm or 1-1/4
”
carriage bolt through the
SS tank adapter (STA) then
to the back of the CURIO
Wing in the top grommet/
eyelet located in the spine
of the wing

Flip the wing to the front.
Make sure you are holding
the carriage bolt pushed in
the top grommet (You may
insert a large flat washer to
prevent damage to the
grommets)

Align the third hole from top
of the Backplate center
spine together with carriage
bolt threaded end

CAUTION: Make sure the
bolt threaded end passes through the grommet on the webbing

Push the carriage bolt threaded end out from the backplate third hole then insert a 24mm flat washer
first, then a lock washer. Tighten the wing nut firmly
Repeat the same steps for the
bottom bolt assembly. Tighten
securely.
(Optional)
For installation of the T-handle, use only a metric sized
30mm (M8) bolt. Repeat the same steps as above. Before fastening
the T-handle insert a (16mm) flat washer to prevent the lock washer
from damaging the T-handle. Tighten securely.