Helios B AMD 1000 Series, Инструкция по установке и эксплуатации

Страница: 32 / 76

6
Meduim-Pressure Axial Smoke Extraction Fans – B AMD F300/F400
Installation and Operating Instructions
Installation examples – Vertical F300/400: Smoke extraction fan B AMD.. with accessory parts
Dimensions B AMD
3 .1 Assembly – Installation
m WARNING
The fan can tip over and crush limbs during installation!
Note transportation diagram and centre of gravity! Wear protective footwear .
All occupational safety regulations, installation conditions and declarations of performance (DIBt technical approval)
must be observed for assembly and installation!
The smoke extraction fans must be positioned and installed so that inspection, maintenance and repair work can be
carried out easily and safely.
Installation conditions
VA: Suitable for “vertical installation”
HA: Suitable for “horizontal installation”
LB: For “Ventilation mode” -20 °C to +60 °C
IB: Can be installed in “Fire area”
Fan without insulating layer, the cooling air duct must be insulated inside the smoke extraction area
AB (WG): “Outside the fire area, thermally insulated”
In sufficiently ventilated rooms, fan with insulating layer F300 L60 or F400 according to DIN 4102-4
IF: “Outside” if it is ensured that precipitation cannot penetrate the smoke extraction fan
m
WARNING
nm
B AMD
Ø A B C D E F
315 240 * 317 356 381 8x Ø9.5
355 303 * 357 395 415 8x Ø9.5
400
303 * 402 438 471 12x Ø9.5
450 378 * 452 487 519 12x Ø9.5
500 378 * 502 541 570 12x Ø9.5
560 480 * 562 605 636 16x Ø11.5
630 555 * 632 674 719 16x Ø11.5
710
555 * 713 751 799 16x Ø11.5
800 585 * 804 837 897 24x Ø11.5
900 675 * 905 934 997 24x Ø11.5
1000 675 * 1005 1043 1097 24x Ø11.5
1120 810 * 1128 1174 1216 24x Ø11.5
* Dim. B motor protrusion (mm) depends on type and motor
Fig .5
F
A
C
D
E
Fig .3
Extension duct
VR
B AMD..
Mounting ring
vertical MRV..
Vibration damper SDD..
for pressure load
Fig .4
Extension duct
VR
B AMD..
Vibration damper SDZ..
for tensile load
Mounting ring
vertical MRV..
EN