MCX3V5 Camera Gimbal
Page 4
STEP 3
| Install the rolling actuating arm
Prepare the above parts
1. Pay attention to the installation direction of the parts;
2. Apply the adhesive on the back of the joints could keep the appearance clean;
3. Do not apply the adhesive onto the fingers, to avoid leaving the finger prints on the parts
4. Do not loose your hand until the adhesive becomes dry, to make sure that all the parts are adhered perfectly
STEP 4
| Install the digital servo to camera gimbal
2
3
1
Please connect the servo to receiver ELE Channel (Futaba is CH2) before linking the camera
mount to the servo axis, and confirm the maximum angle and minimum angle (operating range).
DCS2600Digi
Digital Servo
