MCX3V5 Camera Gimbal
Page 2
To obtain the best performance of this product, please read through the manual carefully and as-
semble the parts according to the detailed instructions. Additional tools you need to use are as
followed: 2.0mm allen driver, small slotted screwdriver or small phillips screwdriver, small clamp and
high quality instant adhesive.
Note: Most parts of this camera mount need to be adhered by instant adhesive, so please pay
attention to the following points when you use it:
1. Proper instant adhesive (Neither too much nor too little);
2. Protect yourself (Do not drip the adhesive into your mouth or eyes);
3. Absorb the extra undried adhesive with absorbent paper to keep the
clean appearance
of camera
mount
4. Apply the adhesive on the back of the parts, which could keep the neat appearance of the mount
The parts can be adhered quickly when using the high quality instant adhesive. And the structural
strength could meet the requirements in use. Please rest assured to use.
CAUTIONS
Dimension
100mm
133mm
41mm
66mm
Dampers
Dampers
Dampers
Dampers
DCS2600Digi
DCS2600Digi
Digital Servo
Special for TILT Axis.
DCS2600Digi
DCS2600Digi
Digital Servo
Special for ROLL Axis.
