Heli-Max AXE CX Nano, Инструкция по эксплуатации

Страница: 2 / 28

2
IMPORTANT PRECAUTIONS
IMPORTANT PRECAUTIONS
●
Only use the included charger with the included battery or replacement
part (GPMP0412).
●
Do not attempt to use this charger with NiCd or NiMH battery packs.
●
Never charge in excess of 4.20V per cell.
●
If the battery should become damaged, discard it. Do not attempt to use
a damaged battery.
●
Do not leave the charger unattended while charging. Disconnect the
battery and remove input power from the charger immediately if either
becomes hot! However, it is normal for the charger to get warm.
●
Disconnect the battery from the charger and carefully move the battery
to a fi reproof location if the battery begins to swell or smoke!
●
Never charge at currents greater than 1C.
●
Always charge in a fi reproof location.
●
Never trickle charge.
●
Never allow the battery temperature to exceed 140° F [60° C].
●
Never disassemble or modify pack wiring in any way or puncture cells.
●
Never discharge below 2.75V per cell.
●
Do not allow water, moisture or foreign objects into the charger.
●
Do not block the air intake holes, which could cause the charger to
overheat.
●
Do not place the charger or any battery on a fl ammable surface or near
a combustible material while in use.
●
Do not charge on a carpet, cluttered workbench, paper, plastic, vinyl,
leather, wood, or inside an R/C model.
●
Never charge inside a full-sized vehicle.
●
Always disconnect the battery from the charger and the power supply
from the charger when not in use.
●
Do not attempt to charge a battery if it is swollen or hot.
●
ALWAYS KEEP OUT OF REACH OF CHILDREN.