Hekatron FSZ Pro, Инструкция по эксплуатации

Страница: 38 / 48

38
11 Commissioning and acceptance
11.3 Monthly functional test
(Extract from the general building inspectorate approvals)
It is the obligation of the owner/operator to keep the hold-open system operational at any time
and to inspect the installation for correct functioning at intervals of no more than one month. If
twelve functional tests that have been successively carried out at one-month intervals do not show
any functional defects, the hold-open system only has to be inspected at 3-month intervals. If the
quarterly functional tests show a functional defect, operability must be restored immediately and
then verified by at least three successive monthly functional tests.
For the measures to be taken for testing, please refer to Section 6.1 of the DIN 14677 standard.
After an adequate instruction this functional test can be carried out by any person on their own
responsibility - special qualification are not required. Scope, results and time of the monthly
respectively quarterly functional test must be recorded. These records must be stored by the owner/
operator.
11.4 Annual testing and maintenance
Moreover, the owner/operator is obliged to carry out a test of the hold-open system for proper
and trouble-free cooperation of all devices and take maintenance measures at intervals of no more
than twelve months or have such tests carried out and maintenance measures taken by others. For
the measures to be taken during the annual testing and maintenance work, please refer to Section
6.1 of the DIN 14677 standard. This annual test and the maintenance measures must only be carried
out by an expert or a specially qualified person.
Scope, results and time of the annual test and maintenance must be recorded. These records must
be stored by the owner/operator.