5 Visualisation software release 1.0.7.8
CPM 500 Electronic Peak Pressure Indicator
24
5.4.4 Sc
reen page “Pmax balance”
5.4.5 Sc
reen page “Remarks”
5.4.6 Scr
een page “Engine data”
5.5 Delete measurement on CPM 500
CPM 500 must be connected via USB cable to PC
After transferring data to PC the operator has the opportunity to delete all measurements via visualisation
software or to override existing data during next measurement on the engine.
Press
“Delete Measurement”
to delete all measurement at CPM 500.
The user can write important
remarks into this field and save it.
Manual input of scavenge air pressure in 0.1 steps
from 0.1 …6.0 bar. For confirmation “OK” must be
pressed.
For to delete selected measurements at CPM 500
unit please see also chapter 5.2 !
