HEINRICH DVA8-500, Инструкция по установке и эксплуатации

Страница: 26 / 33

HEINRICH
1.1.1.1. SYSTEM CONFIGURATION
1. Mainly use to check the details of system configuration parameter
；
2. Setting fire alarm rule
；
3. Setting operate group in DVA8 - 500SF
；
4. Change priority of audio upon special condition
；
1.1.1.1.1. Check details of equipment parameter
From “SYSTEM CONFIGURATION” to“+” to “Equipment parameter” and double click
、
it will show the
dialog box of host, extension host and business microphone setting as below
：
①
You can use drop down list box which at the right of
“Host number(1~20)”
to set the number of
host and extension host number
（
System must set one host, if ho st nu mber is more than one,
“^”and“v” button on the right of “PARTITION ENABLE CONFIGURATION” can be used
）；
②
User can set warning tone of starting and stopping for EMG MICROPHONE
，
when use it, need
from “PUSH” and “RELEASE” to choose the series number of bell in the “prompt” of SD
card,“ ”means choose
，
“ ”Means not choose
；
③
User can base on the condition to allow or forbid single zone of host or extension host, if check
box of zone under “PARTITION ENABLE CONFIGURATION” is “” means can
，
“ means can not. Default is all can be.