HEINRICH DVA8-500, Инструкция по установке и эксплуатации

Страница: 24 / 33

HEINRICH

of ‘01’ , which under ‘HOST ID’, then click.
②
Group control (output the assigned audio)
 Choose the target zone: use the mouse to choose the corresponding group from the left middle
(the list box from the right middle will indicated the zones of the current group)

To choose the output audio: use the mouse to click ‘DVA8 MESSAGE’ (it need on emergency
status) or ‘LINEINPUT AUDIO’ audio on the right side.

All system zones control(for sure it will be the same result if you put all the system zones to one
group or multi groups) Choose the target zone: Click “all zones” then choose output audio (Click
‘DVA8 MESSAGE’(it need to be a emergency status) or ‘LINEINPUT AUDIO’ audio from the right side).
○
4
T urn off the group

1.Choose the target zone
 2.To choose the output audio: use the mouse to click ‘DVA8 MESSAGE’(it need to be a emergency
status) or ‘LINEINPUT AUDIO’ audio from the right side.
1.1.1.1.
STATE
Equipment status.
“STATE&EQUIPMENT ID” show the current equipment device
，
including Host, extension host, and
business MIC;