Heinner VPU001, Инструкция по эксплуатации

Страница: 4 / 27

4
ANGLE GRINDER
Remove the keys and wrenches before switching
on the electric tool. A tool or key which comes
into contact with rotating parts of the appliance
can lead to injuries.
Avoid abnormal working postures. Make sure you
stand squarely and keep your balance at all times.
In this way, you can control the electric tool better
in unexpected circumstances.
Wear suitable work clothes. Do not wear loose
clothing or jewelry. Keep hair, clothes and gloves
away from moving parts. Loose clothing, jewelry
or long hair can get trapped in moving parts.
If vacuuming devices and draining devices can be
fitted, make sure that these are correctly
attached and correctly used. The use of a dust
extraction system can reduce the danger posed by
dust.
Usage and treatment of the electric tool
Do not overload the appliance. Use the correct
tool for your work. You will be able to work better
and more safely within the given performance
boundaries.
Do not use an electrical tool with a defective
switch. An electric tool that cannot be switched on
or off is dangerous and must be repaired.
Pull the plug out of the socket and/or remove the
battery before making any adjustments to the
appliance, changing accessories or put the
appliance down. This safety measure prevents
starting the electric tool unintentionally.
Keep unused electric tools out of the reach of
children. Do not allow people who are not
familiar with the appliance or who have to read
these instructions to use the appliance. Electric
tools are dangerous if they are used by
inexperienced people.
Clean your electric tool carefully. Check whether
moving parts are functioning properly and not
jamming, whether parts are broken or damaged
enough that the functioning of this electric tool is
affected. Have damaged parts repaired before
using the appliance. Many accidents are caused by
badly maintained electric tools.
Keep your cutting tools sharp and clean. Carefully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
Make sure to use electric tools, accessories,
attachments, etc. in accordance with these
instructions. Take the conditions in your work
area and the job in hand into account. Using
electric tools for any purpose other than the one
for which they are intended can lead to dangerous
situations.
Service
Have your electric tool repaired only by trained
personnel using only genuine spare parts. This will
ensure that your electric tool remains safe to use.
Description of symbols
Pay attention to all the signs and symbols shown in
these instructions and on your tool. Make a note
of these signs and symbols. If you interpret the
signs and symbols correctly, your work with the
machine will be safer and better.
Important!
Read the instructions for use before
starting the machine!
Wear safety goggles!
Wear ear protection!
PROPER USE
The angle grinder is designed for cutting and
grinding metal objects and materials used in
constructions like brick, stone, concrete by using
abrasive discs appropriate for the material used.
The grinder cannot be used on materials other
than the ones mentioned above.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the
manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial