6
CORDLESS DRILL
Store power tools, when not in use, out of the reach of children and do not allow people who are not
familiar with the power tool or these instructions to operate it. Power tools are potentially dangerous in
the hands of untrained users.
Maintenance. Check for misalignment or jammed moving parts, breakages or any other feature that might
affect the operation of the power tool. If it is damaged, the power tool must be repaired. Many accidents
are caused by using poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less
likely to jam and are easier to control.
Use the power tool, accessories and cutting tools, etc., in accordance with these instructions and in the
manner intended for the particular type of power tool, taking into account the working conditions and
the work which needs to be done. Using a power tool in ways for which it was not intended can lead to
potentially hazardous situations.
5.5 Service
Your power tool should be serviced by a qualified specialist using only standard spare parts. This will
ensure that it meets the required safety standards.
6. ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGERS
6.1 Batteries (9)
Never attempt to open for any reason.
Do not store in locations where the temperature may exceed 40 °C.
Charge only at ambient temperatures between 4 °C and 40 °C.
Charge only using the charger provided with the tool.
When disposing of batteries, follow the instructions given in the section
“Protecting the environment”.
Do not cause short circuits. If connection is made between the positive (+) and negative (-) terminal
directly or via accidental contact with metallic objects, the battery is short circuited and an intense current
will flow causing heat generation which may lead to casing rupture or fire.
Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators and other polymer
components may be damaged resulting in electrolyte leakage and/or internal short circuiting leading to
heat generation causing rupture or file. Moreover, do not dispose of the batteries in fire, explosion and/or
intense burning may result.
Under extreme conditions, battery leakage may occur. When you notice liquid on the battery, proceed as
follows:
Carefully wipe the liquid off using a cloth. Avoid skin contact.
In case of skin or eye contact, follow the instructions below:
o
Immediately rinse with water. Neutralize with a mild acid such as lemon juice or vinegar.
o
In case of eye contact, rinse abundantly with clean water for at least 10 minutes. Consult a
physician.
Fire hazard! Avoid short-circuiting the contacts of a detached battery. Do not incinerate
the battery.
6.2 Chargers (8)
Use the charger provided with the tool only to charge the battery
Never attempt to charge non-rechargeable batteries.
Have defective cords replaced immediately.
Do not expose to water.
Do not open the charger.
Do not probe the charger.
Содержание VMGA003
Страница 11: ...11 CORDLESS DRILL...
